Product Categories
(Total 12 Products for Chromium Carbide Powder Good Wear Resistance)
Cr3C2-37WC-18NiCoCr Thermal Spray Powder 15-38um
Thermal Spray Materials: Coating Service Powder, Metal Spraying Coating Powder, HVOF Powder, HVOF Tungsten Carbide Powder, Cr3C2-37WC-18NiCoCr Powder Cr3C2-37WC-18NiCoCr, 15-38um chromium carbide powder is generally best using High Velocity Oxygen Fuel (HVOF) spray. Comparing with Cr3C2-NiCr, this powder can offer...
WC-20Cr3C2-7Ni 15-45um Tungsten Carbide Powder
GP07N is
also named Tungsten Carbide Powder, which is a gray powder with composition of
73WC-20Cr3C2-7Ni. Its particle size is 15-45um. In addition, XTC Luoyang can also provide the
PSD required by customers. It is made from medium WC (3um). Its maximum operation temperature is 750 ℃.The WC based powder is produced by...
75Cr3C2-25NiCr 15-45um Chrome Carbide
GP25NC is also named Thermal Spray Powder, which is a gray powder with composition of 75Cr3C2-25NiCr. Its particle size is 15-45um. In addition, XTC Luoyang can also provide the different PSD required by customers. It is made from medium WC (3um). The maximum operation temperature is 850 ℃. The shape of powder is...
20-30 mesh Cast Tungsten Carbide Welding Rod
The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod. Wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test. Mainly used for mining machinery, geological tools etc, by oxy-acetylene with weak carburizing flame. Raw...
Cast Tungsten Carbide Welding Rod
The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod. Wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test. Mainly used for mining machinery, geological tools etc, by oxy-acetylene with weak carburizing flame. Raw...
Irregular Cast Tungsten Carbide Welding Rod
The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod. Wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test. Mainly used for mining machinery, geological tools etc, by oxy-acetylene with weak carburizing flame. Raw...
30-60 mesh WC-8Co Tungsten Carbide Grit Welding Rod
The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod. Wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test. Mainly used for mining machinery, geological tools etc, by oxy-acetylene with weak carburizing flame. Raw...
Tungsten-6Cobalt Tungsten Carbide Pellet Welding Rod
Tube rod is composited by Cemented Carbide Pellet, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods. Wear resistance is 6-7 times better than others. Tested by ASTM G65 method. Mainly used for oil method drill bits, such as tri-cone bits, steel...
WC-Co Tungsten Carbide Pellet Welding Rod
Tube rod is composited by Cemented Carbide Pellet, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods. Wear resistance is 6-7 times better than others. Tested by ASTM G65 method. Mainly used for oil method drill bits, such as tri-cone bits, steel...
WC10Co4Cr and Nickel Alloy Blended PTA Welding Powder
GPNi0105B is a carbide PTA welding powder which mixed by WC-10Co-4Cr cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
WC-8Co Tungsten Carbide Grits 4.8-8.0mm
WC-8Co tungsten carbide Grits 4.8-8.0mm can be used as a good solution to sliding, impact, or abrasive wear damage that happens in underground mining, material crushing, tunneling, surface mining, and road construction,etc. It extends work-pieces service life 6 times longer than standard steel wear solutions....
High Wear Resistance PTA Welding Powder
GPNi0801B is a carbide PTA welding powder which mixed by high portion of spherical cast tungsten carbide powder and nickel based alloy powder. The spherical CTC hardness is HV0.1 2800-3200 which offers welding layer a higher hardness and impact toughness to protect parts that exposed in high abrasion and impact wear....
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
