Product Categories
(Total 12 Products for Abrasion Wear Resistance Pta Welding Powder)
WC10Co4Cr and Nickel Alloy Blended PTA Welding Powder
GPNi0105B is a carbide PTA welding powder which mixed by WC-10Co-4Cr cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
High Wear Resistance PTA Welding Powder
GPNi0801B is a carbide PTA welding powder which mixed by high portion of spherical cast tungsten carbide powder and nickel based alloy powder. The spherical CTC hardness is HV0.1 2800-3200 which offers welding layer a higher hardness and impact toughness to protect parts that exposed in high abrasion and impact wear....
PTA Welding Powder Spherical Cast Tungsten Carbide Powder
GPNi0801B is a carbide PTA welding powder which mixed by high portion of spherical cast tungsten carbide powder and nickel based alloy powder. The spherical CTC hardness is HV0.1 2800-3200 which offers welding layer a higher hardness and impact toughness to protect parts that exposed in high abrasion and impact wear....
Cemented Carbide Nickel based Alloy Blended PTA Powder
GPNi0104B is a carbide PTA welding powder which mixed by WC-6Co cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
WC10Co4Cr and Metal Alloy Blended PTA Welding Powder
GPNi0105B is a carbide PTA welding powder which mixed by WC-10Co-4Cr cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
Cr3C2-37WC-18NiCoCr Thermal Spray Powder 15-38um
Thermal Spray Materials: Coating Service Powder, Metal Spraying Coating Powder, HVOF Powder, HVOF Tungsten Carbide Powder, Cr3C2-37WC-18NiCoCr Powder Cr3C2-37WC-18NiCoCr, 15-38um chromium carbide powder is generally best using High Velocity Oxygen Fuel (HVOF) spray. Comparing with Cr3C2-NiCr, this powder can offer...
GPNi2701B-1 is WC base mixed powder, can be used as Laser cladding powder and thermal spray powder. With higher hardness and anti wearness properity thank other alloy powder. Becuase of its special feature, usually is used for the indusry like: Mining, Oil&Gas, Architect etc. Compare with HVOF process, laser...
15-53um WC-17Co Agglomerated and sintered powder
GP17-1 WC-17Co Tungsten Carbide Powder Agglomerated and sintered 15-53um Tungsten Carbides is generally best using High Velocity Oxygen Fuel HVOF Tungsten Carbide Coating spray. This powder offers wonderful bonding strength and impact toghness; Excellent sliding resistance, shock resistance, wear resistance and...
60% Spherical Cast Tungsten Carbide Laser Cladiing Powder
GPNi2701B is 60% Spherical Cast Tungsten Carbide powder blend with Nickel alloy powder for Laser cladding process. With higher hardness and anti wearness properity than other alloy powder. Becuase of its special feature, usually is used for the indusry like: Mining, Oil&Gas, Architect etc. Compare with HVOF...
GPCo06 cobalt base alloy powder is in cobalt chromium tungsten type alloy powder (Co-Cr-W) Co based alloy powder.Cobalt based alloy powder with good resistant to high temperature properties.impact propertie
Since the solubility of carbon in cobalt is very small, carbon will form carbides with tungsten and disperse in...
Ni60AA powder is Ni based powder and produced by gas atomized process with low oxygen content, good particle surface
quality and high degree of spherical morphology. Coating has excellent wear
resistance at low stress, good adhesive wear performance, good impact
toughness, excellent corrosion and oxidation resistance....
88WC-12Co 15-45um Thermal Spray Powder HVOF
GP12 is also named Tungsten Carbide Powder, which is a gray powder. GP12 is composed of 88WC-12Co and the micron size is 15-45um. In addition, XTC Luoyang can also provide the PSD required by clients. It is made from medium WC. Its max. operation temperature is 500 ℃(930 °F).The WC based powder is manufactured by...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
