Product Categories
(Total 12 Products for Metal Alloy Powder)
GPFe1100 20-53um METAL ALLOY POWDER-IRON BASED
GPFe1000 thermal spray powder coatings combine excellent wear, abrasion, strength and corrosion properties. The chemistry of this material consists of an iron-based matrix with highly disordered borocarbides, it is Stainless Powder. These structures result in coatings with high hardness and salt spray corrosion...
WC10Co4Cr and Metal Alloy Blended PTA Welding Powder
GPNi0105B is a carbide PTA welding powder which mixed by WC-10Co-4Cr cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
Crystalline Tungsten Spray Powder 45-75um
45-75um Tungsten Powder Crystalline Plasma Spray Powder Description: Crystalline tungsten powder is shining gray Pure Tungsten Powder, has good flowability. Tungsten has the highest melting point of all the elements discovered, melting at 3422 °C. It also has the highest boiling point, at 5930 °C. Its density is 19.25...
GPNi2701B-1 is WC base mixed powder, can be used as Laser cladding powder and thermal spray powder. With higher hardness and anti wearness properity thank other alloy powder. Becuase of its special feature, usually is used for the indusry like: Mining, Oil&Gas, Architect etc. Compare with HVOF process, laser...
Nickel Based Alloy Powder 20-53um For Metallurgical
Founded in 2012 with a registered capital of 1.05 billion RMB,Luoyang Golden Egret Geotools Company,as one ofthe cemented carbide backbones of“Golden Egret"and wholly-owned by its parent company XTC, is dedicated to the production and marketing Of the high quality tungsten products including tungsten powder,...
Fine 86WC-10Co-4Cr 5-30um Thermal Spray Powder
Founded in 2012 with a registered capital of 1.05 billion RMB,Luoyang Golden Egret Geotools Company,as one ofthe cemented carbide backbones of“Golden Egret"and wholly-owned by its parent company XTC, is dedicated to the production and marketing Of the high quality tungsten products including tungsten powder,...
NICrMoFe Nickel Based Alloy Powder 20-53um
20-53um NICrFeMo Nickel Based Alloy Powder,HVOF PTA Powder Description: Nickel based alloys are the most widely used and high-strength type of high-temperature alloys. The addition of a large amount of Ni as a stable element for the Woshitian iron phase allows the nickel based alloy to maintain the FCC structure and...
20-53um HVOF HVAF APS alloy powder
XTC Ni80Cr20-6 alloy Ni Based Powder this alloy powder is known for its high resistance to corrosion, oxidation, and high-temperature environments. Ni Based Powder,Inconel 718 Powder,Nickel Base Powder,Inconel 625 Powder It is commonly used in various industries such as aerospace, automotive, electronics, and...
75Cr2C3 NiCr HVOF 15-45um metal powder
THERMAL SPRAY POWDER HVOF Coating properties： thermal spray coating service Cr3C2-NiCr coating properties are influenced significantly by the spray process and spray parameters. The abrasive wear rate for the chromium carbide coatings is controlled by several factors such as: the morphology of the starting powder,the...
WC-10Co-4Cr Thermal Spray Coating Tungsten Carbide Powder
GEOTOOLS provides mono-crystalline WC-based, coarse-grain WC-based, casting WC-based and other kinds of PTA powder. With the high quality material, most advanced production lines and world-class technologies, the PTA coating has high hardness, durable wear resistance, high welding velocity, and low porosity...
SS316L POWER FOR LASER CLADDING
Laser Cladding powder type: Iron Alloy powder, SS 316L powder, steel powder, Stainless Steel Powder GPS316-23 is laser cladding powder. It is made by gas atomized and belongs to Fe base alloy powder.It is a general-purpose stainless steel
alloy with good resistance to atmospheric corrosion and
many organic and...
Cemented Carbide Nickel based Alloy Blended PTA Powder
GPNi0104B is a carbide PTA welding powder which mixed by WC-6Co cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
