 HomeNewsSteelmakers Talk About How to Improve the Profits of Steel Mills

Steelmakers Talk About How to Improve the Profits of Steel Mills

2023-09-12

Billets

Steelmakers talk about how to improve the profits of steel mills. The general direction is to reduce consumption, improve quality, shorten rhythm, ensure that one furnace is a furnace, and avoid waste is the bottom line.

Specifically speaking, there are the following points:
1. Strictly control the loading amount, such as the tare, gross weight and net weight of scrap and molten iron loaded on site, must be known. The proportion of scrap steel structure shall be loaded in accordance with the prescribed proportion. Easy to operate stably and accurately.
2. Improve your life. The temperature is controlled well, the end carbon is lifted, and the cost of the alloy deoxidation operation is reduced.
3. Steel must be out of the net, there can be no leftover steel.
4. The alloy ratio is narrow.
5. Control calcium consumption.
6. Ensure that production goes straight, and the interruption of production is the biggest and most direct waste of cost reduction. Put an end to the revision of steel grades. Correction is to sell high-priced steel into low-priced steel.
7. Recycle scrap steel. Bale edge, billet head, wool iron in slag field, and intermediate bale block must be recovered and digested during shift.
8. Put an end to the small waste around you, although it is small, accumulate more, it will be big. In the work, strictly control various small indicators, carefully consider the process, summarize the law, give full play to the operating advantages of the low limit, and form a variety of cost-reducing operation tips.

In fact, the most critical thing to complete 10 files of profit is to open your mind, dare to think, dare to fight, don't be bound by the old experience of the past, can't do it, do it again. It is not dry, Shouting, this is not, that is not according to, it must be difficult to open the scene.

Industry Keywords: Mill of Rolling Line, Carbide Roller, Steel Wire Rod,

Previous: After the collapse of steel prices, why do steel mills lay off workers and expand steel mills?

Next: Applying Chromium Oxide Coatings Via Plasma Spray Technique